Chapter 3 Booting and Configuring the CSS
Using the Configuration Script
The script prompts you to configure:
•Service name (default name is Server1)
•VIP for the content rule
To configure Layer 5 load balancing, enter 2.
Which feature do you want to configure?
[1]Layer3 load balancing
[2]Layer5 load balancing
[3]Proxy cache
[4]Transparent cache
Enter the number for the feature you want to configure: 2
To accept the script default values, press the Enter key at the prompts.
Creating Layer5 load balancing
Enter service name: [default= Server1]
Enter service IP address: [default = 192.168.10.3] 192.168.3.58
Create another service? [y/n]? n
Enter Virtual IP address for L5_Rule: [default = 192.168.10.4]
192.168.3.8
After the configuration is completed, the script automatically:
•Displays the
•Saves the
Showing the Running Config
|
| !Generated MAR 6 17:53:49 | ||
|
| !**************** GLOBAL ***************** | ||
|
| ip route 0.0.0.0 0.0.0.0 192.168.3.3 | ||
|
| !**************** CIRCUIT **************** | ||
|
| circuit VLAN1 | ||
|
| ip address 192.168.3.6 255.255.255.0 | ||
|
| !**************** SERVICE **************** | ||
|
| service Server1 | ||
|
| ip address 192.168.3.58 | ||
|
| active | ||
|
| Cisco 11500 Series Content Services Switch Hardware Installation Guide |
|
|
|
|
| ||
|
|
| ||
|
|
| ||
