Loading special coated and glossy paper
To load EPSON Special coated paper for 360 and 720 dpi and the EPSON High Quality Glossy paper:
1.Make sure the printable surface of the paper is face down. For coated paper, the printable side is whiter than the other side. For glossy paper, the printable side is face down when the cut corner is toward you on the right as you insert paper in the sheet feeder.
Caution:
c Do not touch the printable surface; hold the sheets by their edges.
2.Insert the paper into the sheet feeder until it meets resistance. You can insert up to 70 sheets of coated paper and up to 50 sheets of glossy paper.
3.Select Special coated paper in the printer driver setup and either 360 or 720 dpi resolution.
Caution:
c Do not print on 720 dpi paper with 360 dpi resolution; likewise, do not print on 360 dpi paper with 720 dpi resolution.
Return unused sheets to the original packaging. Unfavorable storage conditions, especially high temperature, humidity, and direct sunlight, can damage the paper.
4.Adjust the left and rear edge guides so the paper feeds straight into the paper path.
If you have paper feed or paper jam problems, see Chapter 6, “Troubleshooting.”
When you need more special paper, see your dealer or call EPSON Accessories at (800)