Loading transparencies
When printing on transparencies, use only EPSON Transparency film S041030 (Letter). For best results, use transparencies within six months of opening the package.
1.Make sure the printable surface of the transparencies is face down. The printable side is face down when the cut corner is on the bottom right as you hold the transparencies in front of you.
Caution:
c Do not touch the printable surface; hold the sheets by their edges.
2.Insert up to 50 transparencies into the sheet feeder until they meet resistance.
3.Adjust the left and rear edge guides so that the transparencies feed straight into the paper path.
4.Select Transparency and 360 dpi resolution in the printer driver setup as shown in Chapter 3.
Choosing and Loading Paper