Using Special Power-On Functions

These functions are available when you hold down the following buttons when turning on the printer:

Self test (Operate + Load/Eject)

Checks the paper length and performs self-test printing. See Chapter 1, “Testing the Printer.”

Hex dump (Operate + Font + Load/Eject)

Prints the print data in hexadecimal code. See page 6-5.

Demonstration ( Operate + Alt)

Prints a demonstration page.

Default setting (Operate + Economy/Condensed)

Enters the default-setting mode. See “Using the Default-Setting Mode” on page 4-10 for details.

Note:

To exit the hex dump, demonstration, or default-setting modes, press the Pause button and then the Operate button to turn off the printer.

4-6The Control Panel