button). Enable Sleep Mode if you want to have the projector turn off automatically if it is idle (and no signal is received) for 30 minutes or when the A/V Mute Slide is Closed. Enable High Altitude Mode when you are using the projector above 4900 ft (1500 m).

■Standby Mode

Select Network On to enable the projector to be monitored over a network when it is in standby mode (the power light is orange).

■USB Type B

Select Easy MP to project your computer’s display through the projector’s Type B USB port. Choose Link21L if you want to be able to use the remote as a wireless mouse for a USB-connected computer. See page 38 for more information.

■Link 21L

This setting is available only if you select Link21L for the USB Type B setting. Select Off if you want to use the remote as a wireless mouse for a USB-connected computer. See page 38 for more information.

■Multi-screen

Enable this option if you are using the multi-screen feature to project from one source (one image) using multiple projectors (see page 81). Select Screen ID to define individual screen IDs. Choose Image Correction then choose an adjustment: Brightness Correct to adjust the brightness of each display, Color Correct to adjust the balance between red and green, or blue and yellow. See below for more information about multi-screen color adjustment.

■Language

Select from nine languages to be used for the projector menus.

128Fine-Tuning the Projector