5.Check your wireless card’s or adapter’s device settings. (Depending on the type of card or adapter you’re using, some of the settings may be different than those listed here.)

■Set the Network Type to Infrastructure.

■Set the SSID to match the name assigned to the access point (which should also be the projector’s ESSID).

■Make sure Encryption is Disabled if you have not set up encryption on the projector.

6.Click the General tab and make sure that your wireless card or adapter is enabled.

7.When you’re done, click OK to close the wireless properties dialog box.

8.Right-click the Wireless Network Connection icon again and select Properties. You see this screen:

Presenting Through a Wireless Network 61