note

If a critical problem develops with a projector which causes it to suddenly stop working, it may not be possible for the projector to send a message.

If Standby Mode is set to Network ON in the Extended menu, the projector can still be monitored even if the projector is in standby mode (when the power is off).

4.Highlight On to receive email notifications, then press Enter.

5.Enter the IP address for the SMTP server for the projector.

You can enter a number from 0 to 255 in each field of the address. However, the following IP addresses cannot be used:127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255).

6.Enter the SMTP server’s port number. The default value is 25. You can enter a numeric value from 1 to 65535.

7.Choose one of the Destination Address fields, then enter the e-mail address and the contents of the message that you will receive when an problem or warning occurs. You can register up to three addresses. You can enter up to 32 alphanumeric characters for the e-mail address.

8.Select problems or warnings to be notified about by mail.

When the selected problem or warning occurs, an e-mail message is sent to the specified notification addresses. The subject line of the e-mail is EPSON Projector. The e-mail includes the following information:

■Line 1: The name of the projector where the problem has occurred

■Line 2: The IP address of the projector where the problem has occurred

■Line 3: Details of the problem

92Presenting Through a Wireless Network