5.Enter a Display name, select a Parent group, if necessary, enter a Monitor Password, if necessary, and a Description for the projector. Then click the Register button.

To register additional projectors with EMP Monitor, repeat steps 2 through 5.

6.When you’re done adding projectors, click Cancel.

You see a screen with a list of all registered projectors:

 

note

 

 

To delete a projector from

 

the list, right-click the

 

projector name, and click

 

Delete.

 

 

Monitoring Your Projectors

The EMP Monitor screen lets you monitor your projectors using the Status, Video Source, and Error icons shown below. This lets you see which projectors are currently being used, from which source (or port) they are projecting an image, and if a problem occurs.

For detailed status information, right-click the projector in question and click Property.

note

To monitor a projector when it’s in standby mode (plugged in but not turned on), you must select Network On as the Standby Mode setting in the projector’s Extended menu (see page 128).

Managing Projectors 135