4.Loosen the lamp cover screw (you don’t need to remove it). Then slide the lamp cover to the side and lift it off of the projector.
5.Loosen the two screws holding the lamp in place (you can’t remove them).
Loosen, but don’t remove these screws
6. Hold the lamp as shown and pull it straight out.
7.Gently insert the new lamp. (If it doesn’t fit easily, make sure it is facing the right way.)
note
The lamp(s) in this product contain mercury. Please consult your state and local regulations regarding disposal or recycling. Do not put in the trash.
Maintaining the Projector 149