Managing Projectors

The software included with your projector lets you monitor and control your projectors from a remote computer:

■Use EMP Monitor (available for Windows only) to see your projectors’ status, switch image sources, and control basic settings.

■Use the mail notification function to receive e-mail alerts about possible problems.

You can also use NS Connection to register up to 16 projectors as a group. This allows you to provide quick and easy access to these projectors from other computers.

To use the software to manage your projectors, first install EMP Monitor as described on page 172. If you plan to create projector groups, also install EMP NS Connection. Then connect and configure each projector you want to monitor. You can connect the projector wirelessly in Access Point mode or over a wired network (as described on page 57).

This chapter covers the following information:

■Monitoring and controlling your projector with EMP Monitor

■Using e-mail alerts to warn you of problems

■Understanding notification messages

■Using a browser to monitor the projector

131