Epson 1EMP-S1 manual Rear, Computer/Component Video, ports P.13, P.18, Video port s P.18

Before Using the Projector > Part Names and Functions

Rear

•Computer/Component Video

ports P.13, P.18

Inputs analogue video signals from a computer and Component Videog signals from other video sources.

•Video port s P.18

Inputs Composite Videog signals to the projector.

Connect using an A/V cable.

•S-Video port s P.18

Inputs S-Videog signals to the projector.

Connect using an S-Video cable.

•Audio port s P.14, P.19

Inputs audio signals to the projector. Connect using an A/V cable, or a stereo RCA cable.

When using computer and video equipment alternately, swap the cable or use an audio switch.

•Control (RS-232C) port s P.65

Connects the projector to a computer using an RS-232C cable. This port is for control use and should not be used by the customer.

EMP-S1 User’s Guide 6

•Monitor Out port s P.14

Outputs the projected analogue computer signal to an external monitor. This feature is not available for video signals.

•remote control holder s P.9

Store the remote control in here when not in use.

•power inlet s P.20

Connects the power cable.

•security lock s P.63

•remote control infrared

receiver s P.9

Receives signals from the remote control.