Epson 1EMP-S1 manual f Vertical stripes appear in the image, s Supported Display Resolutions P.66

Troubleshooting > When You Suspect a Problem EMP-S1 User’s Guide

f Vertical stripes appear in the image

•Has the "Trackingg" setting been adjusted? Set the tracking value until the vertical stripes disappear. ([Menu] button

"Image" → "Picture Quality" → "Tracking") s "Image menu" P.35

f Image is distorted / Image contains interference

• Have the "Sync.g", "Trackingg" and	If the configuration menu "Image" → "Auto Setup" setting has been set to
"Position" settings been adjusted correctly?	"OFF", press the [Auto] button on the remote control to adjust these
	settings. If the images have not been correctly adjusted after pressing the
	[Auto] button and using the automatic setup function, adjust the settings
	manually in their respective menus. ([Menu] button → "Image" →
	"Picture Quality" → "Sync.") s "Image menu" P.35
• Are the image signal format settings	• When a computer or Component Videog equipment is connected, select
correct?	the appropriate setting for the input source you are using, in the "Image"
	→ "Input Signal" configuration menu.
	• When Composite Videog or S-Videog equipment is connected, select
	the appropriate setting for the video system you are using in the
	"Setting" → "Video Signal." configuration menu.
• Has the correct resolution been selected?	Set the computer so that the signals that are output are compatible with
	this projector. Refer to your computer's documentation for further details.
	s "Supported Display Resolutions" P.66
• Is an extension cable being used?	If using an extension cable, electrical interference may affect the signals.
	Confirm that you are using a shielded cable.

•Are the cables connected correctly? s "Connecting to a Computer" P.12, "Connecting to Video Equipment" P.18

48