Epson 1EMP-S1 manual Sub menu, Function, Sync. g, Color Temperature g, s Reset menu P.41

Advanced Operation > Configuration MenusEMP-S1 User’s Guide

Sub menu		Function
Picture	Sync.g	Adjusts the image when flickering, fuzziness or interference occur in the image.
Quality	(Computer images	Flickering and fuzziness may also occur when the brightness, contrast, sharpness or keystone correction
	only)	settings are adjusted.
		Best results can be obtained by adjusting the tracking before the sync.
	Color Temperatureg	Adjusts bright colours from a reddish tinge to a bluish tinge.
		Lower colour temperature settings produce redder colours and softer colour tones.
		Higher colour temperature settings produce bluer colours and sharper colour tones.
		Press the [e] button and make a setting from the colour adjustment menu which is displayed.
	Saturation	Adjusts the colour depth
	(Video images only)
	Tint	(Adjustment is only possible when Component Videog or NTSC signals are being input)
	(Video images only)	Adjusts the tint of the image.
Auto Setup		ON: When the input source is switched to a computer signal, the projector automatically adjusts the image
(Computer images only)		to its optimal state.
		OFF: Auto Setup is disabled.
Input Signal		Select the type of image signal connected to the Computer/Component Video port.
(Computer/component video		• Computer: computer images
images only)		• Component Video (YCbCr): DVD images
		• Component Video (YPbPr): HDTV images
Reset		Resets all the adjustment values within the "Image" menu (except for "Input Signal") to their default
		settings.
		• Press the [e] button and select "Yes" on the confirmation screen which is displayed.
		• Select "All Reset" to restore all menu settings, such as image and sound, to their default settings.
		s "Reset menu" P.41

37