Epson 1EMP-S1 Functions for Enhancing Projection, Adjusting computer generated images, Dynamic

Advanced Operation
	Functions for Enhancing Projection		EMP-S1 User’s Guide
	Adjusting computer generated images	Selecting a colour mode

27

f Auto setup (Computer connections)

The computer signal is analysed and the following settings are adjusted to ensure the optimum image quality.

•Trackingg

•Position

•Sync.g

You can set Auto setup to off in the "Image" → "Auto Setup"

p configurationP.35 menu. (The default is ON) s "Image menu"

When Auto setup is set to off, press the [Auto] button on the remote control to perform auto setup.

If you press the [Auto] button during E-Zoom or Freeze

p operation, or when a configuration menu is being displayed, the display will be halted and auto setup will take place.

Adjust the Tracking and Sync settings manually if Auto setup cannot be performed. ([Menu] button → "Image" → "Picture Quality" → "Tracking", "Sync.") s "Image menu" P.35

There are five present colour modes available for use.

Make a selection appropriate to the conditions in which you are projecting.

•Dynamic

Images are modulated and made fresher to emphasize brightness.

•Presentation

Brightness is emphasized. For presentations in bright rooms.

•Theatre

Best for watching movies in their natural tones.

•Living Room

Brightness is emphasized. Ideal for playing video games in bright rooms.

•sRGBg

Conforms to the sRGB colour standard. If the connected source has an sRGB mode, set both the projector and the connected source to sRGB.

The colour mode changes each time you press the [Color Mode] button on the remote control.

Dynamic → Presentation → Theatre → Living Room → sRGB

Default Value

• Computer input : Presentation

• Other input: Dynamic

You can set the colour mode in the "Image" → "Color Mode" p configuration menu.

s "Image menu" P.35