Epson 1EMP-S1 manual f No images appear Messages are displayed, s Laptop connection P.12

Troubleshooting > When You Suspect a Problem EMP-S1 User’s Guide

f No images appear (Messages are displayed 1)

•Check the mode which corresponds to the Refer to the documentation provided with your computer for details on

frequency of the image signals being output	changing the resolution and frequency of the image signals being output
from the computer.	from the computer. s "Supported Display Resolutions" P.66

"Not supported"

f No images appear (Messages are displayed 2)

•Has external video output been selected on When using a laptop or a PC with an in-built monitor, select external video

the computer?	output on the computer.
	s "Laptop connection" P.12

•Is the input source properly selected? Press the [Source] button on the Control panel until the correct input

"No signal"	source is selected. For the remote control, press the [Computer] button or
	the [S-Video/Video] button. s "Selecting the Input Source" P.26

•Are the cables connected properly? s "Connecting to a Computer" P.12 , "Connecting to Video Equipment" P.18

• Is the power for the connected computer or s "Turning on the Projector" P.20 video source switched on?

46