Epson 1EMP-S1 manual f Replacing the air filter, CReplace the air filter with a new one

Appendices > Projector Care

f Replacing the air filter

Replacing the air filter can also be performed when the projector is mounted to a ceiling.

ATurn off the projector power, wait for the cool-down period to end, then disconnect the power cable.

Cool-down takes about 20 seconds.

BPut your finger into the recess in the air filter hook, and lift up the air filter to remove it.

CReplace the air filter with a new one.

Take out the old air filter and install the new one. Please ensure there are no gaps between the air filter and the plastic grill.

EMP-S1 User’s Guide 59

DReplace the air filter cover.

First insert the tabs, and then press down on the opposite side until it clicks into place.

p Dispose of used air filters properly in accordance with your local regulations.