Mitsubishi Electronics 700 Series, FR-A700 specifications Same as when Pr = 112 Refer to

CC-Link I/O Specifications

2.3.3I/O signal when CC-Link Ver.2 quadruple setting is selected (Pr. 544 = 114)

The device points usable in CC-Link communication are 32 input (RX) points (12 points are available for PLC function), 32 output (RY) points (12 points are available for PLC function), 8 remote register (RWr) points and 8 remote register (RWw) points.

(1) Remote I/O

Same as when Pr. 544 = 112 ( Refer to page 52)

(2) Remote resister

PLCfunction	Address	Description		PLC function	Address	Description
		Upper 8	Lower 8
device No.		Bits	Bits	device No.
	RWwn	Monitor	Monitor		RWrn	First monitor value
		code 2	code 1
	RWwn+1	Set frequency (0.01Hz			RWrn+1	Second monitor
		increments)				value
		Link	Instruction			Reply	Reply
	RWwn+2	parameter			RWrn+2
		expansion	code			code2	code1
		setting
	RWwn+3	Write	data		RWrn+3	Read	data
	RWwn+4	Monitor code 3			RWrn+4	Third monitor value
	RWwn+5	Monitor code 4			RWrn+5	Fourth monitor value
	RWwn+6	Monitor code 5			RWrn+6	Fifth monitor value
	RWwn+7	Monitor code 6			RWrn+7	Sixth monitor value
D9062	RWwn+8			D9078	RWrn+8
D9063	RWwn+9			D9079	RWrn+9
D9064	RWwn+A	Registers designed to		D9080	RWrn+A	Registers designed
D9065	RWwn+B	read data received		D9081	RWrn+B	to write data to be
		from the master				sent to the master
D9066	RWwn+C			D9082	RWrn+C
		station				station.
D9067	RWwn+D			D9083	RWrn+D
D9068	RWwn+E			D9084	RWrn+E
D9069	RWwn+F			D9085	RWrn+F

("n" indicates a value determined according to the station number setting.)

54