Displaying System Information

When you press F2 from either of the SETUP screens, you will see a list of the following:

0 Processor type

0Coprocessor type (if one is installed)

0R e s e r v e d m e m o r y

0BIOS version number

0Addresses for video mode, serial ports, and printer ports. Press any key to return to the SETUP screen.

Setting the Date and Time

The real-time clock in your computer continuously tracks the date and time-even when the computer is turned off. Once you set the date and time using SETUP, you should not need to change them, unless you adjust the time for daylight savings or a different time zone. (The computer automatically changes the date for leap years.)

Use ‘/‘, &, t, or + to move the cursor to the value you want to change. Then press + or - until you see the value you want.

Setting the Diskette Drive(s)

On your system, diskette drive A is the 3.5-inch, high-density drive installed in the computer. You may also have another drive of a different size or capacity; this is drive B. Check the settings for both drives and correct them if necessary.

1-12Setting Up Your System