If you installed an optional video card, follow the guidelines below to select the correct adapter type.

Video display type options

Select

If

 

 

EGA/VGA

You connected your monitor to the built-in VGA port or you

 

installed a VGA or enhanced graphics adapter (EGA) card

 

 

CGA40*

You installed an optional color graphics adapter set to

 

40-column color graphics adapter (CGA) mode

 

 

CGA80*

You installed a CGA or a multi-mode graphicsadapter

 

(MGA) attached to a color monitor

 

 

MONO*

You installed a monochrome display adapter or an MGA

 

attached to a monochrome monitor

 

 

*For these options, you must change jumpers J1 and J2 on the system board to the OFF position. See Chapter 3 for information on setting jumpers

Setting Keyboard Options

Two options in SETUP allow you to control keyboard settings. The Keyboard option allows you to disable the built-in keyboard connector.

The NumLock on at boot option determines the initial state of the Num Lock function when you turn on or reset your system. When Num Lock is off, the keypad controls cursor movement.

If Num Lock is on, the keypad types numbers.

Select YES to set the Num Lock function on when the system starts or NO to leave it off.

Setting Up Your System

1-15