0 Post-installation procedures

Some of the steps in this chapter may not apply for the drive you are installing. See the documentation that came with your drive for more information.

Removing the Diskette Drive and Mounting Bracket

Your computer has a 3.5-inch diskette drive installed in a mounting bracket. (You may also have a hard disk drive installed in the bracket.) In order to install a hard disk drive, additional diskette drive, or any other type of drive, you must first remove the drive(s) and mounting bracket. Refer to the illustrations below and follow these steps:

1.Remove the two cables from the diskette drive. Grasp the connectors and pull them straight out so you do not bend the pins; do not pull on the cables. (If necessary, remove the cables from the hard disk drive also.)

4-2 Installing and Removing Drives