Note

The 3.5-inch drive installed in your computer is drive A. If you install another diskette drive, it is drive B. You can change the drive assignments through SETUP.

To insert a diskette into a 5.25-inch drive, hold the diskette with the label facing up and the read/ write slot leading into the drive. Slide the diskette into the drive and then turn down the latch to secure it.

When you want to remove the diskette, make sure the drive light is off; then press the release button or turn the latch. Remove the diskette and store it properly.

Caution

Never remove a diskette or reset or turn off the computer while a diskette drive light is on. You could lose data. Also, remove all diskettes before you turn off the computer.

Stopping a Command or Program

You may sometimes need to stop a command or program while it is running. If you have entered an MS-DOS®or application program command that you want to stop, try one of the following:

0 Press Pause

0 Hold down Ctrl and press C

0 Hold down Ctrl and press Break.

Using Your Computer 2-3