3.A jumper’s setting is determined by where the jumper is placed on the pins. Use the following table to identify the pin settings for 2-pin, 3-pin, and 4-pin jumpers. To locate

pin 1, look

at the system board under the jumper; a triangle

is traced on

the board at pin 1.

Jumper

type Position

2-pin

3-pin

2-3

4-pin

2-3

To move a jumper from one position to the other, use needle-nose pliers or tweezers to pull it off its pins and gently move it to the desired position.

Caution

Be careful not to bend the jumper pins or damage any surrounding components on the main system board.

4.Replace any option cards you removed. See page 3-13 for instructions.

3-8 Installing and Removing Options