Memory Module ProblemsThe memory count displayed by the power-on diagnostics program is incorrect.

You may have installed the SIMMs incorrectly. They may be the wrong type or speed, or they may not be inserted all the way. See Chapter 3 for information on installing SIMMs.

Controller Problems

You see a controller error for the drive controllers, the video controller, or the I/O port controllers when you start your system.

The indicated controller on your system board may be faulty. If you have an option card with a controller that will work with

your device, you can

install it and

change

the jumper

settings

on the system board to disable the

built-in controller. You

can

then continue to use

your system until it is

convenient

for

you

to have it serviced.

 

 

 

 

 

If the error message refers to your diskette drive or hard disk drive controllers, make sure the jumpers for these devices are set to enabled. See Chapter 3.

Troubleshooting 5-13