Installing a Card in a Full-length Sot

Follow these steps to install an option card in one of the full-length slots:

1. Remove the retaining

screw securing the option slot cover

to the computer, as shown below. (Keep the screw to secure

the option card to the

computer.)

2.Slide out the slot cover and set it aside. (Store it in a safe place in case you remove the option card later.)

3.Hold the card along the top corners and guide it into the slot, as shown below. (If you are installing a full-length card, insert the front edge of the card into the corresponding guide inside the computer’s front panel.)

3-14 Installing and Removing Options