0Use only the type of power source indicated on the scanner’s label.
0Connect all equipment to properly grounded power outlets. Avoid using outlets on the same circuit as photocopiers or air control systems that regularly switch on and off.
0Place the scanner near a wall outlet where the plug can be easily unplugged.
Placez le scannezu pres d’une de contacte 024 la fiche peut- 2tre debranchke facilement.
0 Do not let the power cord become damaged or frayed.
0If you use an extension cord with the scanner, make sure the total ampere rating of the devices plugged into the extension cord does not exceed the cords ampere rating. Also, make sure the total of all devices plugged into the wall outlet does not exceed 15 amperes.
0Except as specifically explained in this user’s guide, do not attempt to service the scanner yourself.
0Unplug the scanner and refer servicing to qualified service personnel under the following conditions:
If the power cord or plug is damaged; if liquid has entered the scanner; if the scanner has been dropped or the cabinet damaged; if the scanner does not operate normally or exhibits a distinct change in performance. Adjust only those controls that are covered by the operating instructions.
0If you plan to use the scanner in Germany, observe the following:
To provide adequate
Bei Anschluj3 des Scanners an die Stromversorgung muj3 sichergestellt werden, daj3 die Gebiiudeinstallation mit einem 16
6 Introduction