Initialization
The scanner can be initialized (returned to a fixed set of conditions) in the following ways:
Hardware | initialization | * The scanner is turned on. |
|
| * The scanner receives an INIT signal from the |
|
| parallel interface: pin 31 goes LOW. |
|
| * The scanner receives a SCSI Reset signal |
|
| from the SCSI interface. |
|
|
|
Software | initialization | * Software sends the ESC @ (initialize the |
|
| scanner) command. |
|
| * The scanner receives a SCSI Bus Device |
|
| Message, |
|
|
|
Appendix