Note:
Before transporting the scanner, you need to remove the transparency unit and reattach its shipping screw. You can attach the shipping screw only when the transparency unit’s lamp assembly is in its home position. To move it to its home position when the transparency unit is attached to the scanner, close the transparency unit, turn on the scanner, and then turn it off.
Installing the transparency unit
Follow the steps below to install the transparency unit on the scanner.
Note:
You cannot have the automatic document feeder and the transparency unit installed on the scanner at the same time.
1.Make sure the scanner is turned off, and unplug the scanner’s power cable.
2.Remove the scanner’s document cover by holding the cover behind the hinge and lifting the back of the cover straight up as shown on page