Be careful not to scratch OY damage the glass of the d0c2md table, and a0 not use a hard OY abrasive brush to clean it. A damaged glass surface can decrease the scanning quality.
0Never use alcohol, thinner, OY corrosive solvent to clean the scanner. These chemicals can damage the scanner components as well as the case.
0Be careful not to spill liquid into the scanner mechanism OY electronic components. This could permanently damage the mechanism and circuitry.
0Do not spray lubricants inside the scanner.
0Never open the scanner case.
Replacing the fluorescent lamp
The luminosity of the fluorescent lamp declines over time. If the lamp breaks or becomes too dim to operate normally, the scanner stops working and both the READY and ERROR lights flash. When this happens, contact your dealer about replacing the lamp assembly.
Warning:
Never open the case of the scanner. If you think repairs OY adjustments are necessary, consult your dealer.
Scanner Basics