Plugging in the Scanner
1.Connect the power cable to the power inlet on the back of the scanner and plug the other end into a properly grounded outlet as shown below.
Caution:
eThere are several versions of this scanner designed for dzjJimxt voltages, and it is not possible to change the scanner’s voltage. If the label on the back of the scanner does not show the correct voltage for your country, contact your dealer.
2.If any of the scanner’s lights come on, press the OPERATE button to turn off the scanner.
Caution:
eWhenever ~024 turn off the scanner, wait at least 10 seconds before turning it back on. Rapidly turning the scanner on and off may damage it.