Controlling the Picture and Sound

You can use the remote control to preview and select your picture sources, temporarily turn off the picture and sound, freeze the action, zoom in on the picture, display a picture-in-picture image, and adjust the volume.

note

You can use the projector’s menus to fine-tune the picture and sound quality as described in Chapter 4.

Switching Between Picture Sources

If your projector is connected to more than one computer and/or video source, you can switch between the different sources:

■ On the projector’s control panel, there are two Source buttons: Press the Computer/DVI button to switch between equipment connected to the Computer and DVI ports. Or press the Video/BNC button to switch between equipment connected to the Video, S-Video, and BNC ports.

■ On the remote control, there are six Source buttons. Use them to switch between equipment connected to the port identified on each button. (The EasyMP button is not functional with the PowerLite 7900p.)

After you select a source, the screen goes dark for a moment before the image appears.

Source buttons

Using the Remote Control 55