Epson 7900p Connecting and Configuring the Projector, Exit, Install, 4.When you’re finished, click Exit, 2. Turn on the projector (see page 36)

2.Click Install to install both EMP Monitor and EMP Network Manager.3.Follow the on-screen instructions to install the software.4.When you’re finished, click Exit.Once installed, you can access these programs from your computer’s Start menu.

Connecting and Configuring the Projector

Before using the Easy Management software to manage your projector(s), you have to connect each projector you want to monitor to your network and configure it with an appropriate IP address.

1.Connect the projector to your network using a commercially available 100baseTX or 10baseT network cable.

Connect the cable to the Ethernet port on the projector as shown.

note

If you don’t want to install both programs, click Custom, select the program you want to install on the next screen, and click Install.

If you need to uninstall the software, use the Add/Remove Programs utility in the Windows Control Panel.

Ethernet port

2. Turn on the projector (see page 36).

Managing the Projector from a Remote Computer 87