Epson 7900p Using the Menu System, Use the, 66Fine-tuningthe Projector, 1.To display the menu screen, press the Menu button

note

You can also use the buttons on the projector to access the menu system:

Menu	ESC
button	button

Arrow buttons

Enter button

Using the Menu System

You can use the remote control (or the projector’s control panel) to access the menus and change settings. Follow these steps:

1.To display the menu screen, press the Menu button.

You see a menu screen similar to the one shown below (the settings may differ from those shown here, depending on the selected input source):

						Options
		Video		Position		Adjust
		Audio		Tracking	:	0000
		Effect		Sync.	:	0
Menu list		Setting		Brightness	:	0	-		+
		User's Logo		Contrast	:	Auto	Manual	Adjust
		Advanced1		Sharpness	:	0	-		+
		Advanced2		Color Mode		Select [Presentation ]
		About		Resolution	:	Auto	Manual	Select
		Reset All			:	[		]
				Preset		Set
				Reset		Execute
	[	]: Select [	]: Enter					[Menu]: Exit

The menus are listed on the left, and the options available for the highlighted menu are shown on the right.

2.Use the pointer button on the remote control (or the arrow buttons on the projector) to scroll through the menu list. When

you’ve highlighted the desired menu, press the Enter button to select it.

3.Once you’ve selected the menu, use the pointer button to scroll through the list of options. (Some of the options may be

grayed out or unavailable, depending on the selected source.)

66Fine-tuning the Projector