Monitoring Your Projectors

The EMP Monitor screen lets you monitor your projectors using the Status, Video Source, and Error icons shown below. This lets you see which projectors are currently being used, from which source (or port) they are projecting an image, and if a problem occurs.

 

 

 

 

 

 

 

 

 

 

 

 

Status icon

Video Source

 

Error icon

 

 

 

icon

 

 

For detailed status information, select the projector in question and click View details.

The following table explains the meaning of the status icons:Status icons

(green)

Projecting; no problems

 

 

(dark)

Turned off; no problems

 

 

(green)

Projecting; problems detected

 

 

(dark)

Turned off; problems detected

 

 

 

Network error (for example, not connected to

 

network, or power cable disconnected).

 

You may also see this error if Network OFF is

 

selected in Standby Mode (see page 75).

 

 

note

To monitor a projector when it’s in standby mode (plugged in but not turned on), you must select Network ON as the Standby Mode setting in the projector’s menu system (see page 75).

You can monitor up to 64 projectors.

Remember that when Standby Mode is set to Network ON, the exhaust fan continues to operate after the projector has cooled down. This is normal.

Managing the Projector from a Remote Computer 93