Epson 7900p Restoring the Default Settings, select, Fine-tuningthe Projector, ■all the settings in all menus, After changing the settings, press the

4. After highlighting the option you want to adjust, use the pointer button to change the setting. In some cases, you may

have to press the Enter button to see a sub-screen for changing the setting.■Press the left or right side of the pointer button to adjust a slider bar.

■To select from two or more settings, use the pointer button to highlight the desired setting, then press Enter.

5.After changing the settings, press the ESC button to save your changes and return to the previous menu (or press it repeatedly to exit the menu system).

You can also press the Menu button to exit.

- +

ON OFF

Restoring the Default Settings

You can use the menu system’s Reset options to restore the factory- default settings for:

■all the settings listed in a specific menu■all the settings in all menus

To restore the settings in a specific menu, enter the menu whose settings you want to change, select Reset, and confirm as needed. (The example below shows how to reset the Video menu.)

		Video		Position		Adjust
		Audio		Tracking	:	0000
		Effect		Sync.	:	0
		Setting		Brightness	:	0	-		+
		User's Logo		Contrast	:	Auto	Manual	Adjust
		Advanced1		Sharpness	:	0	-		+
		Advanced2		Color Mode		Select [Presentation ]
Reset All		About		Resolution	:	Auto	Manual	Select
		Reset All			:	[		]
Reset				Preset		Set
				Reset		Execute
	[	]: Select [	]: Enter					[Menu]: Exit

To restore all the projector settings to their factory-default values,

select Reset All.

note

Reset All does not reset the Computer Input, BNC Input, User’s Logo, Language, Projector ID, Network, and Lamp settings.

Fine-tuning the Projector 67