note

If a password has already been set, you see the Password Protect Release screen. See “Starting the Projector with a Password” on page 82.

5.Select the screen(s) on which you want your image to appear:

■Select No-Signal Msg. if you want to display your image (instead of a blank screen) when there is no video signal incoming from the currently selected source. Then select

Logo.

■Select A/V Mute if you want your image to appear when you press the A/V Mute button. Then select Logo and press

Enter.6.To display the logo as the startup screen, select the Setting menu.7.Select No-Signal Msg. and press Enter. Then select Logo and press Enter.8.Press Esc.

9.To display the logo as the background screen when the A/V Mute button is press, select the A/V Mute and press Enter.

10.Select Logo and press Enter.11.When you’re finished, press Menu to exit the menus.

Setting a Password

1.Press the Freeze button on the remote control for about 5 seconds until you see the Password Protect menu:

Password Protect

Power ON Protect

:

ON

OFF

Password Timer

:

ON

OFF

Timer

 

Set 9999H

Time-elapsed

:

 

0H

User’s Logo Protect

:

ON

OFF

PasswardSet

2.Select Password and press Enter. You see the message Change the password?3.Select Yes and press Enter.

4.Hold down the Num key on the remote control and use the numeric keypad to enter a 4-digit password.

80Fine-tuning the Projector