Make sure the scanner is turned off before changing the SCSI ID number.
Do not set the SCSI ID to an ID number that is already assigned to another device. Otherwise the computer, scanner, and other devices will not operate properly.
If you are using Windows 98, see Changing the SCSI ID Number in Windows 98 for more information.
Setting the SCSI ID Number
The scanner’s default SCSI ID number is 2. If you add the scanner to a system in which one of your SCSI devices already uses SCSI ID 2, you can change the ID number to an unused number using the rotary switch at the rear of the scanner. See the table on the next page for a guide to SCSI ID numbers. Then follow these steps to change the ID number:
1Turn the scanner off.
2Use the rotary switch at the back of the scanner to change the SCSI ID number.
3Turn the scanner back on.
4Restart your computer.
ON
OFF
|
|
| 1 |
7 |
|
| 2 |
|
|
| |
| 6 | 5 | 4 |
|
| ||
|
|
|
UNLOCK
LOCK
OPTION | TERMINATOR |
| |
| SW |
SCSI
ID
Understanding SCSI Connections | Page 19 |