Playing Sound Through the Projector

The projector has a built-in speaker with a maximum output of 5 W. You can play sound from your video equipment through the projector’s speaker if your video device has an audio output port.

For RCA-Style Audio Output Ports

Most video devices have an RCA-style audio output port. In this case, use the audio adapter supplied with the projector to connect the projector to a commercially-available A/V cable, as shown below:

1.Locate the audio adapter that came with your projector.

2.Connect the black audio plug on one end of the adapter to the Audio jack corresponding to your video source. For example, if you’ve connected your video device to the projector’s Video port, connect the adapter to the Audio jack next to it.

3.Connect the red and white plugs on the other end of the adapter to the red and white plugs on the A/V cable.

4.Connect the red or white plug on the other end of the A/V cable to the corresponding color-coded audio output port on your video source.

If you don’t need to make any other connections, you can plug in your projector and turn it on. See page 30 for instructions.

Audio adapter

note

Each input port has its own dedicated audio input jack. To play sound from a source, you must connect the audio cable to the correct audio input jack.

When you switch the video source, the projector automatically plays sound from the new source.

Setting Up the Projector 27