If you assign the projector a password, a screen appears requesting the password whenever the projector is turned on. If you enter the password incorrectly three times in succession, the projector’s operation is locked and you’ll need to disconnect the power cord, then reconnect it to redisplay the password screen. If you enter the incorrect password 30 times in succession, the projector is locked and you’ll need to contact Epson to unlock it. See “Where To Get Help” on page 91.
If someone else will be using the projector for awhile but you want to make sure that person returns it by a certain time, you can temporarily disable the password for a set period. When that time has elapsed, the password is reactivated and must be entered before the projector can be used.
When you enable the Operation Lock feature, all of the projector’s buttons are disabled except the P Power button.
note
If you enable the password before you set one and you see the prompt to enter the password, enter the default password 0000 to proceed.
You can transfer any image on your computer to the projector, and then use it as the startup screen and/or the screen that is displayed when you press the A/V Mute button. The image can be a company logo, slogan, photograph, or any other image you want to use. The projector considers this image the “User’s Logo.”
Follow these steps to capture the image and transfer it to the projector:
1.Display the image you want to use on the projector. You can use an image from either a computer or video source, such as a VCR.
2. Press the Menu button and select the Extended menu. |
|
note | |
| If the User’s Logo Protect |
| option is ON, you see a |
| message that the logo cannot |
| be recorded. You’ll need to |
| disable the User’s Logo |
| Protect option before you |
| can create or change the |
| user’s logo. See page 65. |
|
|