If the Arrange option isn’t available, you may need to select one of the Simulscan resolution settings:

1. Click the Monitor icon, if necessary.

Click here

Select a Simulscan resolution

2.Select a Simulscan resolution, as shown. (Allow a few seconds for the projector to sync up after making the selection.)

Adjusting the Image

Once you see your image, you’ll need to make certain adjustments:

■To focus or zoom your image, see the next section.

■If the image is too high or too low, you can reposition it. See page 37.

■If the image isn’t square, see page 38.

■To adjust image brightness, see page 39.

■If a computer image displays incorrectly, see page 39.

■To change the color mode for your image and surroundings, see page 39.

You can make many other adjustments to the image—such as changing the brightness, contrast, and aspect ratio—using the projector’s menu system. See Chapter 4 for more information.

Projecting 35