Contact your dealer or call Epson at (800) 873-7766 in the United States for a replacement lamp. Request part number V13H010L30. In Canada, please call (800) 463-7766 to locate a dealer.

Follow these steps to replace the lamp:

1.Press the P Power button twice to turn off the projector. When you hear the projector beep twice, unplug the power cord.

2.If the projector has been on, allow it to cool down for at least an hour (or until the lamp is cool).

3.Use the screwdriver that came with the lamp to loosen the screw holding the lamp cover.

4.Slide the cover out, then lift it off.

5.Use the screwdriver to loosen the two screws holding the lamp in place. (You can’t remove the screws.)

warning

Let the lamp cool before replacing it. If the lamp breaks, handle the shards carefully to avoid injury.

caution

Never touch the lamp with your bare hands. The invisible residue left by the oil on your hands may shorten the lamp life. Use a cloth or gloves to handle the new lamp.

Maintaining and Transporting the Projector 73