Power | Lamp | Temperature |
|
light | light | light | Description |
|
|
|
|
Red | Flashing red | Flashing red | There is an internal error in the projector. Turn the |
|
|
| projector off and unplug it. Contact Epson for |
|
|
| help. |
|
|
|
|
Red | Off | Flashing red | There is a problem with the fan or a sensor. Turn |
|
|
| the projector off and unplug it. Contact Epson for |
|
|
| help. |
|
|
|
|
Red | Flashing red | Off | The lamp is burned out, broken, or not installed |
|
|
| correctly; or the lamp cover is open. Close the |
|
|
| cover or replace or reseat the lamp, if necessary, |
|
|
| as described on page 72. If these suggestions |
|
|
| don’t work, contact Epson. |
|
|
|
|
— | Flashing orange | Off | Replace the lamp with a new one as soon as |
|
|
| possible; see page 72 for instructions. If you |
|
|
| continue to use the lamp, there is a risk it may |
|
|
| break. |
|
|
|
|
Red | Off | Red | The projector has overheated and turned itself |
|
|
| off. Let it cool for about five minutes, then turn it |
|
|
| back on. Make sure there is plenty of space |
|
|
| around and under the projector for ventilation. |
|
|
| Also clean the air filter and air exhaust vents. See |
|
|
| page 71. If it continues to overheat, you may |
|
|
| need to replace the air filter. |
|
|
|
|
Flashing red | Off | Flashing orange | The projector is too hot. Make sure the |
|
|
| temperature in the room does not exceed 95 ° F |
|
|
| (35 ° C) and there is plenty of space around and |
|
|
| under the projector for ventilation. Clean the air |
|
|
| filter and air vents, if necessary. See page 71 for |
|
|
| instructions. |
|
|
|
|
Orange | Off | Off | The projector is in standby or sleep mode. You |
|
|
| can unplug it or press the P Power button to |
|
|
| turn it on. |
|
|
|
|
Flashing | Off | Off | The projector is warming up. Wait for the image |
green |
|
| to appear. |
|
|
|
|
Green | Off | Off | The projector is operating normally. |
|
|
|
|
Flashing | Off | Off | The projector is cooling down. Wait for the light |
orange |
|
| to stop flashing and remain orange before |
|
|
| unplugging it. |
|
|
|
|
80Solving Problems