note
If Auto Setup is turned off, you can still automatically adjust tracking and sync for computer images by pressing the Auto button on the remote control or the Enter button on the projector’s control panel.
If you have repositioned your computer image with the Position setting or made changes to the Tracking or Sync settings, you can press the Auto button on the remote control to restore the default settings.
If you’re adjusting tracking and sync manually, adjust tracking first for best results.
3.Press Enter. Then use the 
pointer button (or up and down arrow buttons) and the Enter button to select any of the following options:
■Auto Setup (computer images)
Leave this setting ON to automatically optimize the computer image. Turn it off if you want to adjust tracking and sync manually.
■Tracking (computer images)
Removes unwanted vertical lines from a computer image by matching the projector’s internal clock to various computer signals. See page 87 for more information about adjusting the tracking.
■Sync (computer images)
Corrects fuzziness or screen flicker by synchronizing the projector with the tracking signal sent from the computer. See page 87 for more information about adjusting the sync setting.
■Position
Use the 
pointer button or arrow buttons to move the image on the screen left, right, up, or down.
■Computer 1 Input
Selects the signal from equipment connected to the
Computer1/Component Video1 port. If your image colors look wrong, try changing this setting from Auto to one of the following: Computer 1 for computer or RGB video sources, or Component Video 1 for component video sources.
■Computer 2 Input
Selects the signal from equipment connected to the
Computer2/Component Video2 port. If your image colors look wrong, try changing this setting from Auto to one of the following: Computer 2 for computer or RGB video sources, or Component Video 2 for component video sources.
56