4. If you need to replace the filter, slide it off, as shown.

5.Align the new filter carefully as you slide it into place. It should click into place.

note

You can check to see how many hours the lamp has been used. See page 61.

Turn the projector off when not in use. Continuous

24-hour-a-day use may reduce the overall life of this product.

Replacing the Lamp

The projection lamp typically lasts for about 2000 hours of use

(in high brightness mode) or 3000 hours (in low brightness mode). It is time to replace the lamp when:

■The projected image gets darker or starts to deteriorate.

■The lamp light is flashing orange.

■The message Replace the Lamp appears on the screen when the lamp comes on. Replace the lamp as soon as possible. If you continue to use the lamp after you see this message, there is a greater possibility of the lamp breaking.

72Maintaining and Transporting the Projector