Adjusting the Volume
You can use the buttons on the remote control or projector to increase or decrease the volume for the projector’s 
button to increase the volume, or the 
button to decrease it. A volume gauge appears on the screen while the volume is being adjusted.
Volume controls
note
You can also adjust the volume using the projector’s Setting menu. See page 57 for details.
You must adjust the volume separately for each input source.
Shutting Down the Projector
When you’ve finished using the projector, follow the recommended procedure to shut it down. This extends the life of the lamp and protects the projector from possible overheating.
1.If you’re using a computer, shut it down first.
2.To turn off the projector, press the P Power button on the projector or remote control.
You see this confirmation message: (If you don’t want to turn it off, press any other button or wait a few seconds until it disappears.)
caution
Never unplug the projector without first turning it off, as described in this section. If the Direct Power ON feature has been enabled (as described on page 60), you must still follow the steps in this section to turn the projector off.
Projecting 41