5. In the SCSI Adapter list, click

Adaptec AHA-294X/AHA-394X or

AIC-78XX PCI SCSI Controller.

6.Click OK. If you see a prompt to install the Windows NT CD-ROM, insert it and click OK. Or use the Browse

function to go to

D:\Adaptec\Win NT\Winnt\4_0

(where D: is your CD-ROM drive).

The necessary driver files are copied to your hard drive, then you see a prompt to restart your system.

7.Click Yes. Be sure to close any open windows to restart.

8.After the system restarts, log on again. Windows NT auto-detects the scanner.

9.To verify that the scanner was detected, click Start, Settings, Control Panel, SCSI Adapters. Then click the Devices tab if necessary. You should see your Adaptec PCI SCSI Controller in the list. Click OK to close the dialog box.

21