Setup Problems

If your system doesn’t recognize the SCSI board (Windows only). . .

■Check the Plug and Play option for your computer; it should be active.

■Make sure your SCSI board is installed correctly. If it isn’t seated firmly in the PCI slot, the computer may not recognize it.

■Run EZ-SCSI, a special SCSI configuration utility for Windows 95, 98, and NT. Insert your EPSON Expression 836XL Scanning Tools CD-ROM. Click

Start,

then click Run. Type D:\Adaptec\Ezscsi\Setup (where

D:is your CD-ROM drive) and click OK, then follow the instructions on the screen. After you restart your computer, your system should recognize your SCSI board.

56

If your system doesn’t recognize the scanner. . .

■Make sure your scanner is on. If you opened your host application before you turned on the scanner, close your application and reopen it. If that doesn’t work, restart your system.

■Check the Plug and Play option for your computer (Windows only); it should be active.

■Make sure your SCSI board is installed correctly.

■If the SCSI board is found, but not the scanner, check the SCSI terminator and ID. Make sure the SCSI ID doesn’t conflict with another SCSI device.

■Check the SCSI cable connection or try another cable.