To prevent damage during shipping, screws are attached to the TPU to secure its lamp assembly. You must remove these screws before using the TPU.
To avoid damaging the TPU, make sure you don’t leave either of the shipping screws in place when you use the unit.
1.Turn the TPU so the glass side faces up.
2.Use a Phillips (cross head) screwdriver to remove both shipping screws from the holes labeled CLAMP, as shown:
3.Install the screws in the storage holes labeled STOCK between the shipping holes.
storage holes
Before transporting the scanner, turn it off, remove the TPU, and replace the shipping screws in the outer holes labeled CLAMP. You must also lock the transportation lock screw on the scanner before transporting it. (See your electronic EPSON Expression 836XL User’s Guide.)
If you can’t replace the shipping screws, the TPU’s lamp assembly may not be in its home position. Reattach the TPU to
the scanner, close the unit, and turn on the scanner. The lamp assembly returns to its home position. Then turn off the scanner, remove the TPU, and insert the screws.
47