EPSON Stylus PHOTO RX600/610, RX620/630 Revision C

Adjustment Overview 65

5.1.1 Adjustment Items for Individual Units and Components

The adjustment items for this product are as indicated below. When performing any of

these adjustments, be sure to execute all the related items so that this product operates

normally.

Note “*1 ”: Before replacing the Main Board, check to see if the data in EEPROM can be read
out. (Backup operation) When the data in EEPROM can be read out, the following
items of adjustments are not necessary.
Head ID input
Head angular adjustment
Bi-D adjustment
PW sensor ajustment
USB ID input
Top Margin Adjustment
First dot adjustment
CR motor drive dispersion

Table 5-1. Adjustment Items for Individual Units and Components

Unit / Component
(Reference Page for
Disassembly/Assembly)
Adjustment Items
Other Items to be Performed
Market
setting Head ID
input
Head
angular
adjustment
Bi-D
adjustment Top Margin
Adjustment First dot
adjustment PW sensor
ajustment
CR motor
drive
dispersion
USB ID
input Firmware
Uploading
Main Board Unit replacement
(p.61) 2561098711124

1.Waste Liquid Pad replacement (p.59)

3.Waste ink pad counter replacement
(p.75)
Printhead removal (p.54) – – 26543–––1. Head cleaning replacement (p.74)
Printhead replacement (p.54) 237654–––

1.Ink charge replacement (p.74)

Printer Unit replacement 2376548 1. Ink charge replacement (p.74)
Waste Liquid Pad
replacement (p.59) ––––––––––
1.Waste ink pad counter replacement
(p.75)
Power Unit replacement
(p.57) –––––––1– –
Power Unit removal /
replacement (p57) ––154326––
C A U T IO N Upon completion of a series of adjustments, perform the following

check pattern printing and check the adjusted values of the printer

again.

Normal Paper Pattern (p77)
Photo Quality Paper Pattern (p77)