EPSON Stylus PHOTO RX600/610, RX620/630 Revision C
Disassembly and Assembly Disassembly and Assembly of Printer Unit 58
4.5.7 Front Frame Assembly1. Middle Housing Removal. (p43)
2. Carriage Unit Removal. (p52)
3. Remove 2 screws that secure the Front Frame Assembly.
4. Remove the Front Frame Assembly from the Printer Frame.
4.5.8 Front Paper Guide1. Front Frame Assembly Removal. (p58)
2. Remove the Spacer, then remove the Paper Rejection Pulley from the Paper
Rejection Roller.
3. Remove the Spacer, then remove the Paper Rejection Roller.
4. Remove one screw, then remove the Front Paper Guide from the Printer Frame.
Figure 4-17. Front Frame Assembly Removal
Figure 4-18. Front Paper Guide Removal
The Front Frame Assembly shall be set at 2 convex (ìþ) places
of the Printer Frame. (Refer to the figure below.)
Lubrication required. For lubrication, refer to the following
section.
6.3.3 Lubrication Points of the Printer (p82)
Convex place
(left side)
Convex place
(right side)
C.B.S TITE 3x6, F/ZN
Tightening torque:0.8 ± 0.1 N
⋅
m
Front Frame Assembly
Spacer
Paper Rejection Roller
Spacer
C.B.S TITE 3x6, F/ZN
Tightening torque:0.8 ± 0.1 N
⋅
m
Front Paper Guide
Paper Rejection
Pulley