EPSON Stylus PHOTO RX600/610, RX620/630 Revision C
Troubleshooting Troubleshooting at Unit Level 23
3.2.2 Error is detected

Figure 3-3. Flowchart-2

3.2.3 Trouble related to Print

Figure 3-4. Fl owchart-3

Start
Yes
Check error contents by
LCD (See Table 3-1).
Printer error?
Yes
No
No
No
No
No
Yes
Yes
Yes
End End
Turn power off, unlock
CR and move CR with
hand.
CR cartridge can
move smoothly?
Refer to Table 3-12
Carriage smoothly
moves?
Ink cartridge
out error is
cleared?
Ink cartridge out
error?
Maintenance error
Replace waste ink porous
pad and reset counter.
(Refer to “Disassembly and
Assembly” on page36 and
“Adjustment” on page63)
Check whether Head
FFC is connected
properly to head.
Replace Ink cartridge
with a new one by
operation panel.
Check CR motor and if
there is no problem,
replace main board.
Start
Yes
Execute test printing
Printing was
successfully
done?
No
Print
quality is
normal?
No
No
No
No
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
End End End
Execute print
adjustment (Refer to
“Adjustment” on
page63)
Execute cleaning
All the
cables are connected
properly to main
board?
Connect correctly
Problem is
solved? Refer to Table 3-12
Problem is
solved?
Replace main board
Problem is
solved?
Problem is
solved?
Problem is
solved?
Replace Ink cartridge
and execute test print.
Refer to Table 3-12